Description
E-Curb penetration seals replace old-style metal pitch pans with versatile, precast components and 1-Part polyether pourable sealants. CHEM LINK's E-Curb System can usually be installed in under 15 minutes and never requires flashing or mechanical attachment - a vast improvement over traditional pitch pans! E-Curbs are designed for use on granulated modified bitumen, asphalt and coal tar B.U.R. (built up roofing). E-Curbs are specified for PVC, EPDM, PIB, and TPO single ply roofing membranes. E-Curbs are highly versatile for sealing penetrations around solar panel mounts, HVAC, Electrical, and any type of structural supports. TPO Primer is required for use with TPO single-ply roof membrane.E-Curb precast form components are composed of light weight nylon resin. The E-Curb is 2-inches high and is available in a variety of shapes and sizes. Standard sizes include bisected circular pieces with inside diameters of 3, 4, 5, 6 or 9 inches; corner pieces with a 2-inch radius; straight pieces in 3-inch or 8-inch lengths; and a 4.5" x 3.4" rectangle. The outer surface is impervious to ice, corrosion, UV (ultraviolet) light and ponding water
FEATURES:
- Rapid installation - "Slip-fit" light weight curb design reduces labor significantly.
- Excellent adhesion to most roofing materials.
- No flashing or mechanical attachment required.
- Service Temperature -40 Degrees F to 200 Degrees F (-40 Degrees C to 93 Degrees C)
- 1-Part accommodates movement and is suggested for use on all granulated membranes and details with excessive movement.
- For sloped roof applications, substitute DuraLink 50 non-slump adhesive/sealant for 1-Part and M-1
- Color: White
- (4) curbs
- (1) 1/2 gallon pouch 1-Part Pourable Sealer
- (2) 10.1 oz cartridges of M-1 Adhesive/Sealant
- ** White E-Curb Kits include 1 pint of low VOC TPO Primer
LEAD TIME TO SHIP:2 days
