Description
ChimneySaver is available in both solvent (mineral spirits) and water-based formulas. The water-based formula is most popular, however, if a water repellent has previously been applied to the masonry, we recommend the solvent-based formula.
Moisture from a variety of sources is always present in masonry and concrete. Sealers and silicone coatings form a water resistant surface film which trap water vapors inside. If these vapors cannot escape, they will contribute to spalling, scaling, deterioration, and freeze-thaw damage. ChimneySaver is 100% vapor permeable – a non film-forming water repellent that penetrates and lines masonry pores.
Features:
- 10 Year Warranty
- 100% Vapor Permeable
- Non-Glossy Look
- Efflorescence/Stain Protection
- Mildew/Fungus Resistant
- Freeze/Thaw Protection
- Can Be Used on Previously Treated Surfaces
- Can Be Used on Driveways and Sidewalks
Technical Information:
- Coverage Rate: Approx. 90-150 sq. ft. per gallon
- Available Sizes: 5, 30 and 55 gallon containers
- Application Temperatures: 40° – 100° F
- Application Method: Pump Sprayer
- Dry Time: 1-2 hours (allow 6 hours before rainfall)
- Cleanup: Mineral spirits while product is still wet – be sure to remove overspray from non-target surfaces (especially windows/glass) before product dries
NOTE: Due to new VOC regulations, the sale of ChimneySaver Solvent Base has been prohibited in certain states including California, Connecticut, Delaware, Illinois, Indiana, Washington D.C., Maine, Massachusetts, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont and Virginia. If you are located in one of these states, you will need to use our VOC compliant formula.
LEAD TIME TO SHIP:12 days
ChimneySaver Solvent Base Data Sheet
